VM600 IOC8T  输入/输出(接口)卡-支持8个温度或过程监控通道

型号：VM600 IOC8T

VM600 IOC8T输入/输出卡用于AMC8卡

这些卡将逐步淘汰，直到2027年才有备用卡。

VM600:不更换。

VM600Mk2: 2024-2025年可更换模块。

AMC8卡的输入/输出(接口)卡-支持8个温度或过程监控通道

可配置的信号输入与电流源输出每个监控通道

直流输出可配置为基于电流的信号(4至20 mA)或基于电压的信号(0至10 V)每个监控通道，4个可配置继电器，每个继电器有三个触点，以及报警复位(AR)和危险旁路(DB)控制输入高质量，高可靠性接口(输入/输出)卡用于AMC8模拟监控卡，用于基于VM600机架的机械监控系统。  IOC8T卡支持8个温度或过程监控通道，所有这些通道都是独立配置的。  IOC8T接口卡安装在VM600 ABE04x机架的后部，在AMC8卡的正后方，形成一对卡。

特性

AMC8卡的输入/输出(接口)卡-支持8个温度或过程监控通道

可配置的信号输入与电流源输出每个监控通道

直流输出可配置为基于电流的信号(4至20 mA)或基于电压的信号(0至10 V)每个监控通道

4个可配置继电器，每个继电器有三个触点，以及报警复位(AR)和危险旁路(DB)控制输入

Model: VM600 IOC8T

The VM600 IOC8T input/output card is used for AMC8 cards

These cards will be phased out, with no replacement cards available until 2027.

VM600: not replaced.

VM600Mk2: Replaceable module for 2024-2025.

Input/output (interface) card for AMC8 card - supports 8 channels for temperature or process monitoring

Configurable signal input and current source output for each monitoring channel

The DC output can be configured as a current based signal (4 to 20 mA) or a voltage based signal (0 to 10 V) per monitoring channel, four configurable relays, each with three contacts, and alarm reset (AR) and hazard bypass (DB) control inputs with high quality, high reliability interface (I/O) cards for AMC8 analog monitoring cards. Mechanical monitoring system based on VM600 rack. The IOC8T card supports eight temperature or process monitoring channels, all of which are configured independently. The IOC8T interface card is installed in the rear of the VM600 ABE04x rack, directly behind the AMC8 card, forming a pair of cards.

peculiarity

Input/output (interface) card for AMC8 card - supports 8 channels for temperature or process monitoring

Configurable signal input and current source output for each monitoring channel

The DC output can be configured as a current-based signal (4 to 20 mA) or a voltage-based signal (0 to 10 V) per monitoring channel

Four configurable relays, each with three contacts, as well as alarm reset (AR) and hazard bypass (DB) control inputs