IOC-555-D  汽轮机安全监测TSl系统

IOC-555-D汽轮机安全监测TSl系统

型号:IOC-555-D

附加信息:TSl系统涡轮安全监测估计航运规模

尺寸:263x58 x28mm

重量:0.4.3 kg

原产国:美国

汽轮机安全监测 TSl 系统是一种用于监测汽轮机运行状态的系统，以确保其安全可靠运行。

IOC-555-D TSl 系统的主要功能包括：

1. 振动监测：通过安装在汽轮机上的振动传感器，TSl 系统可以实时监测汽轮机的振动情况。它可以检测振动的幅值、频率和相位等参数，并提供报警和故障诊断功能。

2. 胀差监测：TSl 系统可以监测汽轮机转子与汽缸之间的胀差，以确保转子与汽缸之间的间隙在正常范围内，避免发生碰撞和摩擦。

3. 轴向位移监测：IOC-555-D 该系统可以监测汽轮机转子的轴向位移，以确保转子在轴向方向上的位置正常，避免与静子部件发生碰撞。

4. 转速监测：TSl 系统可以监测汽轮机的转速，以确保其在正常范围内运行。它可以提供超速保护功能，当转速超过设定值时，触发保护装置。

5. 温度监测：该系统还可以监测汽轮机的温度，包括汽缸温度、轴承温度等，以确保设备在正常温度范围内运行。

通过实时监测和分析这些参数，IOC-555-D TSl 系统可以及时发现汽轮机运行中的异常情况，并提供报警和故障诊断信息。这有助于操作人员采取适当的措施，保证汽轮机的安全运行，防止设备损坏和事故发生。

需要注意的是，具体的 TSl 系统配置和功能可能会因不同的汽轮机类型和应用而有所差异。如果你对特定的汽轮机安全监测 TSl 系统有进一步的问题，建议参考相关的设备手册、技术规格或咨询专业的工程师。

IOC-555-D  汽轮机安全监测TSl系统

IOC-555-D turbine safety monitoring TSl system

Model :IOC-555-D

Additional information :TSl system turbine safety monitoring estimates shipping size

Size :263x58 x28mm

Weight: 0.4.3kg

Country of origin: USA

Turbine Safety Monitoring TSl system is a system used to monitor the operating status of steam turbines to ensure their safe and reliable operation.

The main functions of the IOC-555-D TSl system include:

1. Vibration monitoring: Through the vibration sensor installed on the turbine, the TSl system can monitor the vibration of the turbine in real time. It can detect parameters such as amplitude, frequency and phase of vibration, and provide alarm and fault diagnosis functions.

2. Expansion monitoring: The TSl system can monitor the expansion difference between the turbine rotor and the cylinder to ensure that the gap between the rotor and the cylinder is within the normal range to avoid collision and friction.

3. Axial displacement monitoring: IOC-555-D The system can monitor the axial displacement of the turbine rotor to ensure that the rotor is in a normal position in the axial direction to avoid collision with the stator components.

4. Speed monitoring: The TSl system can monitor the speed of the turbine to ensure that it is operating within the normal range. It can provide overspeed protection function, when the speed exceeds the set value, trigger the protection device.

5. Temperature monitoring: The system can also monitor the temperature of the steam turbine, including cylinder temperature, bearing temperature, etc., to ensure that the equipment operates within the normal temperature range.

By monitoring and analyzing these parameters in real time, the IOC-555-D TSl system can detect the abnormal conditions in the operation of the turbine in time, and provide alarm and fault diagnosis information. This helps the operator to take appropriate measures to ensure the safe operation of the turbine and prevent equipment damage and accidents.

It is important to note that the specific TSl system configuration and functionality may vary depending on the turbine type and application. If you have further questions about a specific turbine safety monitoring TSl system, it is recommended to refer to the relevant equipment manual, technical specifications or consult a professional engineer.