05704-A-0144  四通道控制卡催化输入

制造商:霍尼韦尔

产品: 05704-A-0144

产品类型:四通道控制卡催化输入

功耗:12.8W(最大200mA传感器电流)。8.5 w(典型值)。

驱动:恒流。

初始精度:±1%。

电流调节:电子在1mA步长从90到315mA。

最大驱动电压:10V

保护:有短路、开路保护。

最大线路电阻:200mA时40欧姆(包括传感器)。

满量程信号范围:15mV至300mV

电桥不平衡默认限制:在2V电桥电压下从中心±100mV。

调节:电桥平衡和信号增益的电子调节。

故障检测:开路。短路单头故障。

运输重量:2kg

Manufacturer : Honeywell

Product No.   : 05704-A-0144

Product type : Four Channel Control Card Catalytic Input

Power Consumption: 12.8W (maximum at 200mA sensor current).   8.5W (typical).

Drive: Constant Current.

Initial Accuracy: ±1%.

Current Adjustment: Electronic in 1mA stepsfrom 90 to 315mA.

Maximum Drive Voltage: 10V

Protection: Protected against short circuit and open circuit.

Maximum Line Resistance: 40 ohms (including sensor) at 200mA.

Full Scale Signal Range: 15mV to 300mV

Bridge Imbalance Default Limits: ±100mV from centre at 2V bridge voltage.

Adjustment: Electronic adjustment of bridge balance and signal gain.

Fault Detection: Open circuit.   Short circuit single bead failure.

Shipping weight : 2 Kg